Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1155

preprovisioned
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
preprovisioned;
[edit virtual-chassis]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable the preprovisioned configuration mode for a Virtual Chassis configuration.
When preprovisioned configuration mode is enabled, you cannot use the CLI or the J-Web
interface to change the mastership priority or member ID of member switches.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring a Virtual Chassis Using a Preprovisioned Configuration File on
page 982
Configuring a Virtual Chassis (CLI Procedure) on page 1011
Configuring a Virtual Chassis (J-Web Procedure) on page 1015
Adding a New Switch to an Existing Virtual Chassis Configuration (CLI Procedure) on
page 1016
Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure) on
page 1042
Understanding Virtual Chassis Configuration on page 934
Chapter 48: Configuration Statements for Virtual Chassis
1059