Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1247

Table 168: Port Role Configuration Summary (continued)
Configuration Description
Set RSTP protocol with edge option.
RSTP protocol is disabled if redundant trunk groups
are configured.
Routed Uplink Port Role
Set the port role to Routed Uplink.
Set port family to inet.
Set IP address on the port.
Set class-of-service parameters
=
SCHEDULER_MAP juniper-port-profile-map
IEEE_CLASSIFIER = juniper-ieee-classifier
=
DSCP_CLASSIFIER juniper-dscp-classifier
Set CoS configuration
Layer 2 Uplink Port Role
Set the port role to
Layer 2 Uplink
Set port family to ethernet-switching
Set port mode to .
trunk
Set Native VLAN name.
Set the port as part of all valid VLANs; "valid" refers
to all VLANs except native VLAN and voice VLANs.
Set port security parameter.
Set RSTP protocol with point-to-point option.
Disable RSTP if redundant trunk groups are
configured.
Set class-of-service parameters.
=
SCHEDULER_MAP juniper-port-profile-map
=
IEEE_CLASSIFIER juniper_ieee_classifier
DSCP_CLASSIFIER = juniper_dscp_classifier
Copyright © 2010, Juniper Networks, Inc.
CLI Commands
set protocols rstp interface interface edge
set protocols rstp interface interface disable
set interfaces interface apply-macro juniper-port-profile
Routed Uplink
set interfaces interfaceunit 0 family inet address
ipaddress
set class-of-service interfaces interfacescheduler-map
juniper-port-profile-map
set class-of-service interfaces interface unit 0
classifiers ieee-802.1 juniper_ieee_classifier
set class-of-service interfaces interfaceunit 0 classifiers
dscp juniper-dscp-classifier
Refer Table 169 on page 1152 for details.
.
set interfaces interface apply-macro juniper-port-profile
Layer2 Uplink
set interfaces interface unit 0 family ethernet-switching
port-mode trunk
set interfaces interface unit 0 family ethernet-switching
native-vlan-id vlan-name
set interfaces interface unit 0 family ethernet-switching
vlan members vlan-members
set ethernet-switching-options secure-access-port
dhcp-trusted
set protocols rstp interface interface mode point-to-point
set protocols rstp interface interface disable
set class-of-service interfaces interfacescheduler-map
juniper-port-profile-map
set class-of-service interfaces interface unit 0
classifiers ieee-802.1 juniper_ieee_classifier
set class-of-service interfaces interfaceunit 0 classifiers
dscp juniper-dscp-classifier
Chapter 52: Configuring Interfaces
1151