Setting Or Deleting The Rescue Configuration (J-Web Procedure) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation

Setting or Deleting the Rescue Configuration (J-Web Procedure)

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Setting or Deleting the Rescue Configuration (J-Web Procedure) on page 431
Reverting to the Rescue Configuration for the EX Series Switch on page 429
Loading a Previous Configuration File (CLI Procedure) on page 426
Configuration Files Terms on page 398
For information on show system configuration rescue, see the Junos OS System Basics
and Services Command Reference at
http://www.juniper.net/techpubs/software/junos/index.html
A rescue configuration is a well-known configuration that recovers a switch from a
configuration that denies management access. You set a current committed configuration
to be the rescue configuration through the J-Web interface or CLI.
If someone inadvertently commits a configuration that denies management access to
an EX Series switch and the console port is not accessible, you can overwrite the invalid
configuration and replace it with the rescue configuration by using the LCD panel on the
switch. The rescue configuration is a previously committed, valid configuration. We
recommend that the rescue configuration include the IP address (accessible from the
network) for the management port.
To view, set, or delete the rescue configuration using the J-Web interface, select
> Config Management >Rescue
tasks:
View the current rescue configuration—Click
Set the current running configuration as the rescue configuration—Click
.
configuration
Delete the current rescue configuration—Click
Setting or Deleting the Rescue Configuration (CLI Procedure) on page 430
Reverting to the Rescue Configuration for the EX Series Switch on page 429
Configuration Files Terms on page 398
Chapter 24: Managing Junos OS Configuration
. On the Rescue page, you can perform the following
View rescue configuration
Delete rescue configuration
.
Maintain
.
Set rescue
.
431