Show System Services Dhcp Conflict; Table 106: Show System Services Dhcp Conflict Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show system services dhcp conflict

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show system services show system services
dhcp conflict dhcp conflict
Copyright © 2010, Juniper Networks, Inc.
show system services dhcp conflict
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers only and EX Series switches) Display Dynamic Host Configuration
Protocol (DHCP) client-detected conflicts for IP addresses. When a conflict is detected,
the DHCP server removes the address from the address pool.
This command has no options.
view and system
clear system services dhcp conflict on page 615
show system services dhcp conflict on page 623
Table 106 on page 623 describes the output fields for the
conflict command. Output fields are listed in the approximate order in which they appear.

Table 106: show system services dhcp conflict Output Fields

Field Name
Detection time
Detection method
Address
user@host> show system services dhcp conflict
Detection time
2004-08-03 19:04:00 PDT
2004-08-04 04:23:12 PDT
2004-08-05 21:06:44 PDT
Chapter 38: Operational Mode Commands for System Services
Field Description
Date and time the client detected the conflict.
How the conflict was detected.
IP address where the conflict occurs. The addresses in the conflicts
list remain excluded from the pool until you use a
command to manually clear the list.
services dhcp conflict
Detection method Address
ARP 3.3.3.5
Ping 4.4.4.8
Client 3.3.3.10
show system services dhcp
clear system
623