Interfaces - Juniper JUNOS OS 10.3 - SOFTWARE Manual

interfaces

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
interfaces {
interface-name {
bootp;
rarp;
slarp;
}
}
[edit system autoinstallation]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For J Series Services Routers and EX Series switches only. Configure the interface on
which to perform autoinstallation. A request for an IP address is sent from the interface.
Specify the IP address procurement protocol.
—Send requests over serial interfaces with Frame Relay.
bootp
rarp —Send requests over Ethernet interfaces.
—(On J Series Services Routers only) Send requests over serial interfaces with HDLC.
slarp
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Upgrading Software Using Automatic Software Download on EX Series Switches on
page 90
J Series Services Router Basic LAN and WAN Access Configuration Guide
autoinstallation on page 439
Chapter 26: Configuration Statements for Configuration Management
443