Juniper JUNOS OS 10.3 - SOFTWARE Manual page 382

Complete Software Guide for Junos
show chassis lcd show chassis lcd
fpc-slot 2 (EX8200) fpc-slot 2 (EX8200)
show chassis lcd menu show chassis lcd menu
(EX4200) (EX4200)
show chassis lcd menu show chassis lcd menu
(EX8200) (EX8200)
286
®
OS for EX Series Ethernet Switches, Release 10.3
xe-3/0/0 Off
xe-3/0/1 Off
xe-3/0/2 Off
xe-3/0/3 Off
xe-3/0/4 Off
xe-3/0/5 Off
xe-3/0/6 Off
xe-3/0/7 Off
xe-5/0/0 Off
xe-5/0/1 Off
xe-5/0/2 Off
xe-5/0/3 Off
xe-5/0/4 Off
xe-5/0/5 Off
xe-5/0/6 On
xe-5/0/7 On
xe-7/0/5 Off
show chassis lcd fpc-slot 2
Interface LED(ADM/SPD/DPX)
------------------------------------------
xe-2/0/0 Off
xe-2/0/1 Off
xe-2/0/2 Off
xe-2/0/3 Off
xe-2/0/4 Off
xe-2/0/5 Off
xe-2/0/6 Off
xe-2/0/7 Off
user@switch> show chassis lcd menu
fpc0:
--------------------------------------------------------------------------
status-menu
status-menu vcp-status
status-menu power-status
status-menu environ-menu
status-menu show-version
maintenance-menu
maintenance-menu halt-menu
maintenance-menu system-reboot
maintenance-menu rescue-config
maintenance-menu vc-uplink-config
maintenance-menu factory-default
On an EX4200 switch in a Virtual Chassis, the output for the
command is the same as the output for the
all-members
command.
user@switch> show chassis lcd menu
status-menu
status-menu sf-status1-menu
status-menu sf-status2-menu
status-menu psu-status1-menu
status-menu psu-status2-menu
status-menu environ-menu
status-menu show-version
show chassis lcd menu
show chassis lcd menu
Copyright © 2010, Juniper Networks, Inc.