Destination - Juniper JUNOS OS 10.3 - SOFTWARE Manual

destination

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
destination destination-name {
retry-count count retry-interval seconds;
transfer-delay seconds;
}
[edit event-options policy policy-name then event-script filename],
[edit event-options policy policy-name then execute-commands]
Statement introduced in Junos OS Release 7.5.
Support extended to the
[edit event-options policy policy-name then event-script
filename] hierarchy level in Junos OS Release 7.6.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Assign a location to which to upload command or script output for the specified policy.
destination-name —Name of a destination defined in the
hierarchy level.
[edit event-options]
The remaining statements are explained separately.
maintenance—To view this statement in the configuration.
maintenance-control—To add this statement to the configuration.
Configuring an Event Policy to Execute Operational Mode Commands
Executing Event Scripts in an Event Policy
destinations on page 674
Chapter 41: Configuration Statements for System Monitoring
destinations statement at the
673