Juniper JUNOS OS 10.3 - SOFTWARE Manual page 410

Complete Software Guide for Junos
Table 53: show system switchover Output Fields (continued)
Field Name Field Description
State of the kernel database:
Kernel database
Routing Engine peer state:
Peer state
show system show system
switchover (Backup switchover (Backup
Routing Engine) Routing Engine)
show system
switchover all-lcc
(Routing Matrix)
314
®
OS for EX Series Ethernet Switches, Release 10.3
—Kernel database has synchronized.
Ready
—Kernel database is synchronizing. Displayed when there are updates within the last
Synchronizing
5 seconds.
—The primary and standby Routing Engines are running incompatible kernel
Version incompatible
database versions.
—An error occurred when the state was replicated from the primary Routing Engine.
Replication error
Inspect /var/log/ksyncd for possible causes, or notify Juniper Networks customer support.
—Peer completed switchover transition.
Steady State
—Peer in switchover transition.
Peer Connected
user@host> show system switchover
Graceful switchover: On
Configuration database: Ready
Kernel database: Ready
Peer state: Steady State
user@host> show system switchover all-lcc
lcc0-re0:
--------------------------------------------------------------------------
Multichassis replication: On
Configuration database: Ready
Kernel database: Ready
Peer state: Steady State
lcc2-re0:
--------------------------------------------------------------------------
Multichassis replication: On
Configuration database: Ready
Kernel database: Ready
Peer state: Steady State
Copyright © 2010, Juniper Networks, Inc.