Show System Buffers - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show system buffers

Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
872
®
OS for EX Series Ethernet Switches, Release 10.3
show system buffers
show system buffers
<all-members>
<local>
<member member-id>
show system buffers
<all-chassis | all-lcc | lcc number | scc>
show system buffers
<all-chassis | all-lcc | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display information about the buffer pool that the Routing Engine uses for local traffic.
Local traffic is the routing and management traffic that is exchanged between the Routing
Engine and the Packet Forwarding Engine within the router or switch, as well as the routing
and management traffic from IP (that is, from OSPF, BGP, SNMP, ping operations, and
so on).
none —Show all buffer statistics.
—(EX4200 switches only) (Optional) Show buffer statistics for on all
all-members
members of the Virtual Chassis configuration.
all-lcc —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
show buffer statistics for all T640 routers (or line-card chassis) connected to the
TX Matrix router. On a TX Matrix Plus router, show buffer statistics for all T1600
routers (or line-card chassis) connected to the TX Matrix Plus router.
all-chassis —(TX Matrix and TX Matrix Plus routers only) (Optional) Show buffer statistics
for all of the chassis.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
show buffer statistics for a specific T640 router (or line-card chassis) that is
connected to the TX Matrix router. On a TX Matrix Plus router, show buffer statistics
for a specific T1600 router (or line-card chassis) that is connected to the TX Matrix
Plus router. Replace number
—(EX4200 switches only) (Optional) Show buffer statistics for the local Virtual
local
Chassis member.
member member-id —(EX4200 switches only) (Optional) Show buffer statistics for the
specified member of the Virtual Chassis configuration. Replace
value from 0 through 9.
with a value from 0 through
Copyright © 2010, Juniper Networks, Inc.
3 .
with a
member-id