Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1166

Complete Software Guide for Junos
request virtual-chassis recycle
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
request virtual-chassis request virtual-chassis
recycle member-id 3 recycle member-id 3
1070
®
OS for EX Series Ethernet Switches, Release 10.3
request virtual-chassis recycle member-id member-id
Command introduced in Junos OS Release 9.0 for EX Series switches.
Make a previously used member ID available for reassignment.
When you remove a member switch from the Virtual Chassis configuration, the master
reserves that member ID. To make the member ID available for reassignment, you must
use this command.
NOTE: You can run this command from the Virtual Chassis master only.
member-id member-id —Specify the member id that you want to make available for
reassignment to a different member switch.
system-control
request virtual-chassis renumber on page 1071
Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure) on
page 1042
request virtual-chassis recycle member-id 3 on page 1070
user@host> request virtual-chassis recycle member-id 3
Copyright © 2010, Juniper Networks, Inc.