Table 55: Show System Users Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Additional Information
Required Privilege
Level
List of Sample Output
Output Fields

Table 55: show system users Output Fields

Field Name Field Description
time and up Current time, in the local time zone, and how long the router or switch has been operational.
users Number of users logged in to the router or switch.
load averages Load averages for the last 1 minute, 5 minutes, and 15 minutes.
USER Username.
TTY Terminal through which the user is logged in.
System from which the user has logged in. A hyphen indicates that the user is logged in through the
FROM
console.
Time when the user logged in.
LOGIN@
How long the user has been idle.
IDLE
Processes that the user is running.
WHAT
show system users show system users
show system users lcc
no-resolve (TX Matrix
Copyright © 2010, Juniper Networks, Inc.
By default, when you issue the
Plus master Routing Engine, the command is broadcast to all the T640 (in a routing
matrix based on a TX Matrix router) or T1600 (in a routing matrix based on a TX Matrix
Plus router) master Routing Engines connected to it. Likewise, if you issue the same
command on the TX Matrix or TX Matrix Plus backup Routing Engine, the command is
broadcast to all the T640 (in a routing matrix based on a TX Matrix router) or T1600 (in
a routing matrix based on a TX Matrix Plus router) backup Routing Engines that are
connected to it.
view
show system users on page 319
show system users lcc no-resolve (TX Matrix and TX Matrix Plus Router) on page 319
show system users (TX Matrix Plus Router) on page 320
Table 55 on page 319 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
user@host> show system users
7:30PM up 4 days, 2:26, 2 users, load averages: 0.07, 0.02, 0.01
USER TTY FROM
root d0 -
blue p0 level5.company.net 7:30PM
user@host> show system users lcc 2 no-resolve
lcc2-re0:
Chapter 17: Operational Mode Commands for System Setup
command on a TX Matrix or TX Matrix
show system users
show system users
LOGIN@ IDLE WHAT
Fri05PM 4days -csh (csh)
- cli
command.
319