Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1136

Complete Software Guide for Junos
Verifying That the Virtual Chassis Ports Are Operational
Purpose
Action
1040
®
OS for EX Series Ethernet Switches, Release 10.3
Use the show virtual-chassis vc-port command to display the status of Virtual Chassis
ports (VCPs).
NOTE: The interfaces for VCPs are not displayed when you issue the show
interfaces ge- command.
Display the VCPs:
user@SWA-0> show virtual-chassis vc-port all-members
fpc0:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Configured
1/1 Configured
1/2 Configured
1/3 Configured
fpc1:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Configured
1/1 Configured
fpc2:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Configured
1/1 Configured
1/2
1/3
fpc3:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Configured
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
3 Up 1000
3 Up 1000
4 Up 1000
4 Up 1000
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
3 Up 10000
3 Up 10000
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
3 Up 1000
3 Up 1000
—1 Down 1000
—1 Down 1000
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
3 Up 10000
Copyright © 2010, Juniper Networks, Inc.
Neighbor
ID Interface
1 vcp-0
1 vcp-1
2 vcp-255/1/0
2 vcp-255/1/1
4 vcp-255/0/20
4 vcp-255/0/21
Neighbor
ID Interface
0 vcp-0
0 vcp-1
3 vcp-255/1/0
3 vcp-255/1/1
Neighbor
ID Interface
3 vcp-0
3 vcp-1
0 vcp-255/1/0
0 vcp-255/1/1
Neighbor
ID Interface
2 vcp-0
2 vcp-1
1 vcp-255/1/0