Juniper JUNOS OS 10.3 - SOFTWARE Manual page 389

Table 50: show ntp associations Output Fields (continued)
Field Name Field Description
Peer name and status of the peer in the clock selection process:
peer-name
show ntp associations show ntp associations
Copyright © 2010, Juniper Networks, Inc.
space—Discarded because of a high stratum value or failed sanity checks.
—Designated "falseticker", by the intersection algorithm.
x
—Culled from the end of the candidate list.
.
—Discarded by the clustering algorithm.
–
+ —Included in the final selection set.
—Selected for synchronization, but the distance exceeds the maximum.
#
—Selected for synchronization.
*
—Selected for synchronization, but the packets-per-second (pps) signal is in use.
o
user@host> show ntp associations
remote refid
==============================================================================
*wolfe-gw.junipe tick.ucla.edu
Chapter 17: Operational Mode Commands for System Setup
st t when poll reach delay
2 u 43 64 377
offset disp
1.86 0.319 0.08
293