Table 152: Commands Relevant Only To The Master - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Table 151: Commands That Can be Run on All or Specific Members of the Virtual Chassis
Configuration (continued)
Commands Available for
Command Forwarding
show system users
show system virtual-memory

Table 152: Commands Relevant Only to the Master

Commands Relevant Only to the
Master
set date
show system buffers
show system connections
show system processes
Related
Documentation
Verifying the Member ID, Role, and Neighbor Member Connections of a Virtual Chassis
Member
Purpose
1038
®
OS for EX Series Ethernet Switches, Release 10.3
Purpose
Show all users who are
currently logged in.
Display the usage of Junos OS
kernel memory, listed first by
size of allocation and then by
type of usage. Use
show
for
system virtual-memory
troubleshooting with JTAC.
Table 152 on page 1038 shows a list of commands that are relevant only to the master. Do
not use the options
all-members
Purpose
Set the data and time.
Display information about the buffer pool that the Routing Engine uses for local traffic.
Local traffic is the routing and management traffic that is exchanged between the Routing
Engine and the Packet Forwarding Engine within the switch, as well as the routing and
management traffic from IP (that is, from OSPF, BGP, SNMP, ping operations, and so
on).
Display information about the active IP sockets on the Routing Engine. Use this command
to verify which servers are active on a system and which connections are currently in
progress.
Display information about software processes that are running on the switch and that
have controlling terminals.
Monitoring Virtual Chassis Configuration Status and Statistics on page 1041
Understanding Virtual Chassis Components on page 924
Junos OS System Basics and Services Command Reference at
http://www.juniper.net/techpubs/software/junos/index.html
You can designate the role that a member performs within a Virtual Chassis configuration
or you can allow the role to be assigned by default. You can designate the member ID
that is assigned to a specific switch by creating a permanent association between the
switch's serial number and a member ID, using a preprovisioned configuration. Or you
all-members
Shows all users who are
currently logged in to any
members of the Virtual
Chassis configuration.
Displays information for all
members of the Virtual
Chassis configuration.
or with these commands.
member-member-id
Copyright © 2010, Juniper Networks, Inc.
member-member-id
Shows all users who are
currently logged in to the
specified member switch.
Displays information for the
specified member switch.