Request System Reboot - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
—(TX Matrix Plus routers only) (Optional) Reboot using the specified partition
partition
on the boot media. This option has the following suboptions:
—Reboot from partition 1.
1
2 —Reboot from partition 2.
—Reboot from the alternate partition.
alternate
scc —(TX Matrix routers only) (Optional) Reboot the Routing Engine on the TX Matrix
router (or switch-card chassis). If you issue the command from
If you issue the command from
sfc number —(TX Matrix Plus routers only) (Optional) Reboot the Routing Engine on the
TX Matrix Plus router (or switch-fabric chassis). If you issue the command from
re0 is rebooted. If you issue the command from
with .
0
—(EX-series switches only) (Optional) Reboot a partition on the boot media.
slice slice
This option has the following suboptions:
1 —Power off partition 1.
—Power off partition 2.
2
—Reboot from the alternate partition.
alternate
Reboot requests are recorded in the system log files, which you can view with the
log command (see show log). Also, the names of any running processes that are
scheduled to be shut down are changed. You can view the process names with the
command (see show system processes).
system processes
On a TX Matrix or TX Matrix Plus router, if you issue the
on the master Routing Engine, all the master Routing Engines connected to the routing
matrix are rebooted. If you issue this command on the backup Routing Engine, all the
backup Routing Engines connected to the routing matrix are rebooted.
NOTE: To reboot a router that has two Routing Engines, reboot the backup
Routing Engine (if you have upgraded it) first, and then reboot the master
Routing Engine.
maintenance
clear system reboot on page 232
request system reboot on page 256
request system reboot (at 2300) on page 256
Chapter 17: Operational Mode Commands for System Setup
, is rebooted.
re1 re1
re1 , re1 is rebooted. Replace number

request system reboot

, is rebooted.
re0 re0
,
re0
show
show
command
255