Table 132: Show Chassis Environment Routing-Engine Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Output Fields
show chassis show chassis
environment environment
routing-engine routing-engine
(Nonredundant) (Nonredundant)
show chassis
environment
routing-engine
(Redundant)
show chassis
environment
routing-engine (TX
Matrix Plus Router)
Copyright © 2010, Juniper Networks, Inc.
Table 132 on page 777 lists the output fields for the
command. Output fields are listed in the approximate order in which they
routing-engine
appear.

Table 132: show chassis environment routing-engine Output Fields

Field Name
Routing engine slot status
State
Temperature
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State
Temperature
user@host> show chassis environment routing-engine
Route Engine 0 status:
State:
Temperature:
Route Engine 1 status:
State:
Temperature:
user@host> show chassis environment routing-engine
sfc0-re0:
--------------------------------------------------------------------------
Routing Engine 0 status:
State
Temperature
Routing Engine 1 status:
State
Temperature
lcc0-re0:
--------------------------------------------------------------------------
Routing Engine 0 status:
State
Temperature
Routing Engine 1 status:
State
Temperature
Chapter 42: Operational Mode Commands for System Monitoring
show chassis environment
Field Description
Number of the Routing Engine slot:
Status of the Routing Engine:
—MCS is online, operating as Master.
Online Master
—MCS is online, operating as Standby.
Online Standby
Temperature of the air flowing past the Routing Engine.
Online Master
27 degrees C / 80 degrees
Online Master
26 degrees C / 78 degrees F
Online Standby
26 degrees C / 78 degrees F
Online Master
26 degrees C / 78 degrees F
Online Standby
28 degrees C / 82 degrees F
Online Master
30 degrees C / 86 degrees F
Online Standby
29 degrees C / 84 degrees F
or .
0 1
777