Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1214

Complete Software Guide for Junos
Table 163: Components of the Topology for Connecting Virtual Chassis Access Switches to a
Virtual Chassis Distribution Switch (continued)
Hostname and
Switch VCID
SWA-1 Host-A Access
switch
VCID 1
SWD-0 Host-D Distribution
switch
VCID 4
SWD-1 Host-D Distribution
switch
VCID 4
Configuration
CLI Quick
Configuration
Step-by-Step
Procedure
1118
®
OS for EX Series Ethernet Switches, Release 10.3
Base Hardware
EX4200-48P
switch
EX4200 L-24F
switch
EX4200 L-24F
switch
To configure two uplink LAGs from the Virtual Chassis access switch to the Virtual Chassis
distribution switch:
To quickly configure aggregated Ethernet high-speed uplinks between a Virtual Chassis
access switch and a Virtual Chassis distribution switch, copy the following commands
and paste them into the switch terminal window:
[edit]
set chassis aggregated-devices ethernet device-count 2
set interfaces ae0 aggregated-ether-options minimum-links 2
set interfaces ae0 aggregated-ether-options link-speed 10g
set interfaces ae1 aggregated-ether-options minimum-links 2
set interfaces ae1 aggregated-ether-options link-speed 10g
set interfaces ae0 unit 0 family inet address 192.0.2.0/25
set interfaces ae1 unit 1 family inet address 192.0.2.128/25
set interfaces xe-0/1/0 ether-options 802.ad ae0
set interfaces xe-1/1/0 ether-options 802.ad ae0
set interfaces xe-0/1/1 ether-options 802.ad ae1
set interfaces xe-1/1/1 ether-options 802.ad ae1
To configure aggregated Ethernet high-speed uplinks between a Virtual Chassis access
switch and a Virtual Chassis distribution switch:
Specify the number of LAGs to be created on the chassis:
1.
[edit chassis]
user@Host-A# set aggregated-devices ethernet device-count 2
Specify the number of links that need to be present for the
2.
:
up
[edit interfaces]
user@Host-A# set ae0 aggregated-ether-options minimum-links 2
Specify the number of links that need to be present for the
3.
up :
Uplink Module Member ID
One XFP uplink 1
module
One XFP uplink 0
module
One XFP uplink 1
module
Copyright © 2010, Juniper Networks, Inc.
Trunk Port
to SWD-0
xe-1/1/0
to SWD-1
xe-1/1/1
xe-0/1/0 to SWA-0
to SWA-1
xe-0/1/1
to SWA-0
xe-1/1/0
xe-1/1/1 to SWA-1
ae0 LAG interface to be
LAG interface to be
ae1