Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1159

serial-number
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
serial-number serial-number;
[edit virtual-chassis preprovisioned member member-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
In a preprovisioned Virtual Chassis configuration, specify the serial number of each
EX4200 member switch to be included in the Virtual Chassis configuration. If you do not
include the serial number within the Virtual Chassis configuration, the switch cannot be
recognized as a member of a preprovisioned configuration.
serial-number —The switch's permanent serial number, which is located on the back of
the switch.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring a Virtual Chassis Using a Preprovisioned Configuration File on
page 982
Configuring a Virtual Chassis (CLI Procedure) on page 1011
Configuring a Virtual Chassis (J-Web Procedure) on page 1015
Adding a New Switch to an Existing Virtual Chassis Configuration (CLI Procedure) on
page 1016
Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure) on
page 1042
Understanding Virtual Chassis Configuration on page 934
Chapter 48: Configuration Statements for Virtual Chassis
1063