Monitoring System Properties; Table 124: Summary Of Key System Properties Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Table 123: Packet Capture Field Summary (continued)
Field Function
Don't Resolve Specifies that IP addresses are not to be resolved into
Addresses hostnames in the packet headers displayed.
No Timestamp Suppresses the display of packet header timestamps.
Write Packet Writes the captured packets to a file in PCAP format in
Capture File /var/tmp. The files are named with the prefix jweb-pcap
and the extension .pcap. If you select this option, the
decoded packet headers are not displayed on the packet
capture page.
Related
Documentation

Monitoring System Properties

Purpose
Action
Meaning

Table 124: Summary of Key System Properties Output Fields

Field Values
General Information
Serial Serial number for the switch.
Number
Junos OS Version of Junos OS active on the switch, including
Version whether the software is for domestic or export use.
Hostname The name of switch.
IP Address The IP address of the switch.
658
®
OS for EX Series Ethernet Switches, Release 10.3
Using the CLI Terminal on page 151
Use the monitoring functionality to view system properties such as the name and IP
address of the switch and resource usage.
To monitor system properties in the J-Web interface, select
.
System Information
To monitor system properties in the CLI, enter the following commands:
show system uptime
show system users
show system storage
Table 124 on page 658 summarizes key output fields in the system properties display.
Your Action
To prevent packet capture from resolving IP
addresses to hostnames, select this check
box.
To stop displaying timestamps in the
captured packet headers, select this check
box.
To decode and display the packet headers on
the J-Web page, clear this check box.
Monitor > System View >
Additional Information
Export software is for use outside of the U.S. and
Canada.
Copyright © 2010, Juniper Networks, Inc.