Show System Services Dhcp Statistics; Table 109: Show System Services Dhcp Statistics Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show system services dhcp statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 109: show system services dhcp statistics Output Fields

Field Name Field Description
Lease time assigned to clients that do not request a specific lease time.
Default lease time
Minimum time a client can retain an IP address lease on the server.
Minimum lease time
Maximum time a client can retain an IP address lease on the server.
Maximum lease time
Total number of packets dropped and number of packets dropped because of:
Packets dropped
628
®
OS for EX Series Ethernet Switches, Release 10.3
show system services dhcp statistics
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers and EX Series switches only) Display Dynamic Host Configuration
Protocol (DHCP) server statistics.
This command has no options.
view and system
clear system services dhcp statistics on page 616
show system services dhcp statistics on page 629
Table 109 on page 628 describes the output fields for the
statistics command. Output fields are listed in the approximate order in which they
appear.
Invalid hardware address
Invalid opcode
Invalid server address
No available address
No interface match
No routing instance match
No valid local addresses
Packet too short
Read error
Send error
show system services dhcp
Copyright © 2010, Juniper Networks, Inc.