Juniper JUNOS OS 10.3 - SOFTWARE Manual page 347

Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
request system request system
power-off power-off
Copyright © 2010, Juniper Networks, Inc.
—(Optional) (TX Matrix router only) Power off only the master Routing Engine or the
scc
backup Routing Engine on the TX Matrix router (or switch-card chassis). If you issue
the command from the master Routing Engine, the master SCC is powered off. If
you issue the command from the backup Routing Engine, the backup SCC is powered
off.
sfc number —(Optional) (TX Matrix Plus router only) Power off only the master Routing
Engine or the backup Routing Engine on the TX Matrix Plus router (or switch-fabric
chassis). If you issue the command from the master Routing Engine, the master SFC
is powered off. If you issue the command from the backup Routing Engine, the backup
SFC is powered off. Replace number with zero.
slice slice —(EX-series switches only) (Optional) Power off a partition on the boot media.
This option has the following suboptions:
1 —Power off partition 1.
—Power off partition 2.
2
alternate —Reboot from the alternate partition.
On a routing matrix composed of a TX Matrix router and T640 routers, if you issue the
request system power-off
master Routing Engines connected to the routing matrix are powered off. If you issue this
command on the backup Routing Engine, all the backup Routing Engines connected to
the routing matrix are powered off.
Likewise, on a routing matrix composed of a TX Matrix Plus router and T1600 routers, if
you issue the
request system power-off
Engine, all the master Routing Engines connected to the routing matrix are powered off.
If you issue this command on the backup Routing Engine, all the backup Routing Engines
connected to the routing matrix are powered off.
If you issue the
request system power-off both-routing-engines
Matrix or TX Matrix Plus router, all the Routing Engines on the routing matrix are powered
off.
maintenance
request system power-off on page 251
When you enter this command, you are provided feedback on the status of your request.
user@host> request system power-off message "This router will be powered off in 30 minutes.
Please save your data and log out immediately."
warning: This command will not halt the other routing-engine.
If planning to switch off power, use the both-routing-engines option.
Power Off the system ? [yes,no] (no) yes
*** FINAL System shutdown message from remote@nutmeg ***
System going down IMMEDIATELY
This router will be powered off in 30 minutes. Please save your data and log out
Chapter 17: Operational Mode Commands for System Setup
command on the TX Matrix master Routing Engine, all the
command on the TX Matrix Plus master Routing
command on the TX
251