Juniper JUNOS OS 10.3 - SOFTWARE Manual page 484

Complete Software Guide for Junos
fpc
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
388
®
OS for EX Series Ethernet Switches, Release 10.3
fpc slot {
pic pic-number {
sfpplus {
pic-modemode;
}
}
power-budget-priority priority;
[edit chassis]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
On an EX3200 or an EX4200 switch, specify the port of the SFP+ uplink module for which
you want to configure the operating mode.
On an EX8200 switch, specify the line card slot for which you want to assign a power
priority.
—Number of the slot:
slot
0—EX3200 and standalone EX4200 switches. The FPC refers to the switch itself.
0–9—EX4200 switch in a Virtual Chassis configuration. The value corresponds to the
switch's member ID.
0–7—EX8200 switch. The slot is a line card slot.
0–15—EX8216 switch. The slot is a line card slot.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 1156
Configuring the Power Priority of Line Cards (CLI Procedure) on page 384
Copyright © 2010, Juniper Networks, Inc.