Ex4500 Default Configuration - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation

EX4500 Default Configuration

Copyright © 2010, Juniper Networks, Inc.
family ethernet-switching;
}
}
ge-0/1/2 {
unit 0 {
family ethernet-switching;
}
}
ge-0/1/3 {
unit 0 {
family ethernet-switching;
}
}
}
protocols {
igmp-snooping{
vlan all;
}
lldp {
interface all;
}
lldp-med {
interface all;
}
rstp;
}
ethernet-switching-options {
storm-control {
interface all;
}
}
poe {
interface all;
}
Reverting to the Default Factory Configuration for the EX Series Switch on page 427
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 187
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 189
Understanding Configuration Files for EX Series Switches on page 397
EX Series Switches Interfaces Overview on page 1095
Each EX Series switch is programmed with a factory default configuration that contains
the values set for each configuration parameter when a switch is shipped. The default
configuration file sets values for system parameters such as
Ethernet switching on all interfaces, enables IGMP snooping, and enables the LLDP and
RSTP protocols.
Chapter 23: Configuration Management Overview
and
syslog commit
, configures
409