Table of Contents
Advertisement
CHAPTER 30
Monitoring Users
Managing Users (J-Web Procedure)
Copyright © 2010, Juniper Networks, Inc.
Managing Users (J-Web Procedure) on page 501
You can use the Users Configuration page for user information to add new users to an
EX Series switch. For each account, you define a login name and password for the user
and specify a login class for access privileges.
To configure users:
Select
>
1.
Configure
System Properties
The User Management page displays details of users, the authentication order, the
RADIUS servers and TACACS servers present.
Click Edit.
2.
Click any of the following options on the
3.
Add—Select this option to add a user. Enter details as described in Table 100 on
page 502.
Edit—Select this option to edit an existing user's details. Enter details as described
in Table 100 on page 502.
Delete—Select this option to delete a user.
Click an option on the
Authentication Methods and Order
4.
Authentication Order—Drag and drop the authentication type from the Available
Methods section to the Selected Methods. Click the up or down buttons to modify
the authentication order.
RADIUS server—Click one:
Add—Select this option to add an authentication server. Enter details as described
in Table 101 on page 503.
Edit—Select this option to modify the authentication server details. Enter details
as described in Table 101 on page 503.
Delete—Select this option to delete an authentication server from the list.
>
.
User Management
tab:
Users
tab:
501
Advertisement
Chapters
Table of Contents
Troubleshooting
