Time-Format - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

time-format

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
704
®
OS for EX Series Ethernet Switches, Release 10.3
Configuring Event Policies to Ignore an Event
Configuring Event Policies to Raise SNMP Traps
time-format (year | millisecond | year millisecond);
[edit system syslog]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Include the year, the millisecond, or both, in the timestamp on every standard-format
system log message. The additional information is included for messages directed to
each destination configured by a
[edit system syslog] hierarchy level, but not to destinations configured by a
statement.
By default, the timestamp specifies the month, date, hour, minute, and second when the
message was logged—for example,
NOTE: When the
syslog file filename]
millisecond —Include the millisecond in the timestamp.
—Include the year in the timestamp.
year
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Including the Year or Millisecond in Timestamps
Junos System Log Messages Reference
structured-data on page 700
, , or statement at the
file console user
.
Aug 21 12:36:30
structured-data statement is included at the
hierarchy level, this statement is ignored for the file.
host
[edit system
Copyright © 2010, Juniper Networks, Inc.