Configuring A Custom Display Message - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Configuring a Custom Display Message

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[edit]
user@switch# set chassis lcd-menu menu-item menu-name disable
To enable a menu:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-name disable
To disable a menu option:
[edit]
user@switch# set chassis lcd-menu menu-item menu-option disable
To enable a menu option:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-option disable
You can configure the second line of the LCD to display a custom message temporarily
for 5 minutes or permanently.
To display a custom message temporarily:
On an EX3200 switch, a standalone EX4200 switch, or an EX8200 switch:
user@switch> set chassis display message message
On an EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message fpc-slot slot-number
To display a custom message permanently:
On an EX3200 switch, a standalone EX4200 switch, or an EX8200 switch:
user@switch> set chassis display message message permanent
On an EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message fpc-slot slot-number permanent
NOTE: The
Menu
configured to display a custom message.
To disable the display of the custom message:
user@switch> clear chassis display message
You can view the custom message by issuing the command
LCD Panel in EX3200 and EX4200 Switches
LCD Panel in an EX8200 Switch
button and the button are disabled if the LCD is
Enter
Chapter 15: Initial Configuration
show chassis lcd .
193