Clear Chassis Display Message - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

clear chassis display message

Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
230
®
OS for EX Series Ethernet Switches, Release 10.3
clear chassis display message
clear chassis display message
<lcc number | scc>
clear chassis display message
<lcc number | sfc number>
Command introduced in Junos OS Release 7.5.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option for the TX Matrix Plus routers introduced in Junos OS Release 9.6.
(M40e, M160, and M320, T Series routers, and EX Series switches only) Clear or stop a
text message on the craft interface display, which is on the front of the router or on the
LCD panel display on the switch. The craft interface alternates the display of text
messages with standard craft interface messages, switching between messages every
2 seconds. By default, on both the router and the switch, the text message is displayed
for 5 minutes. The craft interface display has four 20-character lines. The LCD panel
display has two 16-character lines, and text messages appear only on the second line.
—Clear or stop a text message on the craft interface display.
none
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
clear or stop a text message on the craft interface on a specific T640 router that is
connected to the TX Matrix router. On a TX Matrix Plus router, clear or stop a text
message on the craft interface on a specific T1600 router that is connected to the
TX Matrix Plus router. Replace
scc —(TX Matrix routers only) (Optional) Clear or stop a text message on the craft interface
on the TX Matrix router (or switch-card chassis).
—(TX Matrix Plus routers only) (Optional) Clear or stop a text message on the
sfc number
craft interface on the TX Matrix Plus router (or switch-fabric chassis). Replace
with 0.
clear
Configuring the LCD Panel on EX Series Switches (CLI Procedure) on page 192
set chassis display message on page 271
show chassis craft-interface
clear chassis display message on page 231
See show chassis craft-interface for an explanation of output fields.
with a value from
number
Copyright © 2010, Juniper Networks, Inc.
through .
0 3
number