Show Ntp Associations; Table 50: Show Ntp Associations Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show ntp associations

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 50: show ntp associations Output Fields

Field Name Field Description
Address or name of the remote NTP peer.
remote
Reference identifier of the remote peer. If the reference identifier is not known, this field shows a value
refid
of
Stratum of the remote peer.
st
Type of peer:
t
When the last packet from the peer was received.
when
Polling interval, in seconds.
poll
Reachability register, in octal.
reach
Current estimated delay of the peer, in milliseconds.
delay
Current estimated offset of the peer, in milliseconds.
offset
disp Current estimated dispersion of the peer, in milliseconds.
292
®
OS for EX Series Ethernet Switches, Release 10.3
show ntp associations
<no-resolve>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Network Time Protocol (NTP) peers and their state.
none —Display NTP peers and their state.
—(Optional) Suppress symbolic addressing.
no-resolve
view
show ntp status on page 294
show ntp associations on page 293
Table 50 on page 292 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
.
0.0.0.0
(broadcast), (local),
b l
show ntp associations
(multicast), or (unicast).
m u
Copyright © 2010, Juniper Networks, Inc.
command.