Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1152

Complete Software Guide for Junos
no-management-vlan
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1056
®
OS for EX Series Ethernet Switches, Release 10.3
no-management-vlan;
[edit virtual-chassis member member-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Remove the specified member's out-of-band management port from the Virtual
Management Ethernet (VME) global management VLAN of the Virtual Chassis
configuration.
For a member that is functioning in a linecard role, you can use this configuration to
reserve the member's management Ethernet port for local troubleshooting:
virtual-chassis {
member 2 {
no-management-vlan;
}
}
You cannot configure the IP address for a local management Ethernet port using the CLI
or the J-Web interface. To do this, you need to use the shell
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up a Multimember Virtual Chassis Access Switch with a Default
Configuration on page 957
Configuring the Virtual Management Ethernet Interface for Global Management of a
Virtual Chassis (CLI Procedure) on page 1027
Understanding Global Management of a Virtual Chassis Configuration on page 929
command.
ifconfig
Copyright © 2010, Juniper Networks, Inc.