Retry-Options - Juniper JUNOS OS 10.3 - SOFTWARE Manual

retry-options

Syntax
Hierarchy Level
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
retry-options {
backoff-threshold number;
backoff-factor seconds;
maximum-time seconds;
minimum-time seconds;
tries-before-disconnect number;
}
login]
[edit system
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
maximum-time option introduced in Junos OS Release 9.6.
option introduced in Junos OS Release 9.6 for EX Series switches.
maximum-time
Maximum number of times a user can attempt to enter a password while logging in
through SSH or Telnet before being disconnected.
backoff-threshold number
the user experiences a delay when attempting to reenter a password. Use the
backoff-factor option to specify the length of delay, in seconds.
Range: 1 through 3
Default: 2
—Length of delay after each failed login attempt. The length of
backoff-factor seconds
delay increases by this value for each subsequent login attempt after the value
specified in the
backoff-threshold
Range: 5 through 10
Default: 5
—Maximum length of time that the connection remains open
maximum-time seconds
for the user to enter a username and password to log in. If the user remains idle and
does not enter a username and password within the configured
connection is closed.
Range: 20 through 300
Default: 120
—Minimum length of time that the connection remains open
minimum-time seconds
while the user is attempting to enter a password to log in.
Range: 20 through 60
Default: 20
tries-before-disconnect number
to enter a password to log in through SSH or Telnet.
Range: 1 through 10
Default: 10
Chapter 32: Configuration Statements for User and Access Management
—Threshold for the number of failed login attempts before
option.
—Maximum number of times a user is allowed to attempt
, the
maximum-time
527