Configuring A Dhcp Sip Server (Cli Procedure) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

Configuring a DHCP SIP Server (CLI Procedure)

Related
Documentation
552
®
OS for EX Series Ethernet Switches, Release 10.3
You can use the
sip-server
a DHCP server. The DHCP server sends configured option values—Session Initiation
Protocol (SIP) server addresses or names—to DHCP clients when they request them.
Previously, you were only allowed to specify a SIP server by address using
. You specify either an IPv4 address or a fully qualified domain
services dhcp option 120]
name to be used by SIP clients to locate a SIP server. You cannot specify both an address
and name in the same statement.
To configure a SIP server using the
[edit system services dhcp]
user@switch# set sip-server address
For example, to configure one address:
[edit system services dhcp]
user@switch set sip-server 172.168.0.11
To configure a SIP server using the
[edit system services dhcp]
user@switch# set sip-server name
For example, to configure a name:
[edit system services dhcp]
user@switch set sip-server abc.example.com
DHCP Services for EX Series Switches Overview on page 547
Junos OS System Basics Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
statement on the EX Series switch to configure option 120 on
address option:
option:
name
[edit system
Copyright © 2010, Juniper Networks, Inc.