Show System Virtual-Memory - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show system virtual-memory

Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show system virtual-memory
show system virtual-memory
<all-members>
<local>
<member member-id>
show system virtual-memory
<all-chassis | all-lcc | lcc number | scc>
show system virtual-memory
<all-chassis | all-lcc | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display the usage of Junos kernel memory listed first by size of allocation and then by
type of usage. Use
show system virtual-memory
Customer Support.
none —Display kernel dynamic memory usage information.
—(TX Matrix and TX Matrix Plus routers only) (Optional) Display kernel dynamic
all-chassis
memory usage information for all chassis.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
all-lcc
display kernel dynamic memory usage information for all T640 routers (or line-card
chassis) connected to the TX Matrix router. On a TX Matrix Plus router, display kernel
dynamic memory usage information for all T1600 routers (or line-card chassis)
connected to the TX Matrix Plus router.
all-members —(EX4200 switches only) (Optional) Display kernel dynamic memory usage
information for all members of the Virtual Chassis configuration.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
display kernel dynamic memory usage information for a specific T640 router that is
connected to the TX Matrix router. On a TX Matrix Plus router, display kernel dynamic
memory usage information for a specific T1600 router that is connected to the TX
Matrix Plus router. Replace
—(EX4200 switches only) (Optional) Display kernel dynamic memory usage
local
information for the local Virtual Chassis member.
—(EX4200 switches only) (Optional) Display kernel dynamic memory
member member-id
usage information for the specified member of the Virtual Chassis configuration.
Replace with a value from 0 through 9.
member-id
Chapter 17: Operational Mode Commands for System Setup
for troubleshooting with Juniper Networks
with a value from
number
through .
0 3
321