Juniper JUNOS OS 10.3 - SOFTWARE Manual page 362

Complete Software Guide for Junos
Description
Options
266
®
OS for EX Series Ethernet Switches, Release 10.3
option added in Junos OS Release 7.4.
dynamic-flow-capture
option added in Junos OS Release 7.5.
dlsw
event-processing option added in Junos OS Release 7.5.
option added in Junos OS Release 7.5.
ppp
option added in Junos OS Release 8.0.
l2ald
link-management option added in Release 8.0.
option added in Junos OS Release 8.4.
pgcp-service
Command introduced in Junos OS Release 9.0 for EX Series switches.
sbc-configuration-process
services pgcp gateway option added in Junos OS Release 9.6.
and options introduced for the TX Matrix Router in Junos OS Release 9.6.
sfc all-sfc
Restart a Junos OS process.
CAUTION: Never restart a software process unless instructed to do so by a
customer support engineer. A restart might cause the router or switch to drop
calls and interrupt transmission, resulting in possible loss of data.
none —Same as
gracefully
—(Optional) Restart the configuration management process that
adaptive-services
manages the configuration for stateful firewall, Network Address Translation (NAT),
intrusion detection services (IDS), and IP Security (IPsec) services on the Adaptive
Services PIC.
—(TX Matrix and TX Matrix Plus routers only) (Optional) Restart the software
all-chassis
process on all chassis.
all-lcc —(TX Matrix and TX Matrix Plus routers only) (Optional) For a TX Matrix router,
restart the software process on all T640 routers connected to the TX Matrix router.
For a TX Matrix Plus router, restart the software process on all T1600 routers
connected to the TX Matrix Plus router.
all-sfc —(TX Matrix Plus routers only) (Optional) For a TX Matrix Plus router, restart the
software processes for the TX Matrix Plus router (or switch-fabric chassis).
—(Optional) Restart the RADIUS accounting process.
audit-process
autoinstallation —(EX Series switch only) (Optional) Restart the autoinstallation process.
—(Optional) Restart the chassis management process.
chassis-control
class-of-service —(Optional) Restart the class-of-service (CoS) process, which controls
the router's or switch's CoS configuration.
—(EX Series switch only) (Optional) Restart the database replication
database-replication
process.
option added in Junos OS Release 9.5.
.
Copyright © 2010, Juniper Networks, Inc.