File Show - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

file show

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
file show file show
file show
(Routing Matrix)
464
®
OS for EX Series Ethernet Switches, Release 10.3
file show filename
<encoding base64>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the contents of a file.
filename —Name of a file. For a routing matrix, the filename must include the chassis
information.
—(Optional) Encode file contents.
encoding base64
maintenance
file show on page 464
file show (Routing Matrix) on page 464
When you enter this command, you are provided feedback on the status of your request.
user@host> file show /var/log/messages
Apr 13 21:00:08 romney /kernel: so-1/1/2: loopback suspected; going to standby.
Apr 13 21:00:40 romney /kernel: so-1/1/2: loopback suspected; going to standby.
Apr 13 21:02:48 romney last message repeated 4 times
Apr 13 21:07:04 romney last message repeated 8 times
Apr 13 21:07:13 romney /kernel: so-1/1/0: Clearing SONET alarm(s) RDI-P
Apr 13 21:07:29 romney /kernel: so-1/1/0: Asserting SONET alarm(s) RDI-P
...
user@host> file show lcc0-re0:/var/tmp/.gdbinit
lcc0-re0:
--------------------------------------------------------------------------
####################################################################
# Settings
####################################################################
set print pretty
####################################################################
# Basic stuff
####################################################################
define msgbuf
printf "%s", msgbufp->msg_ptr
end
# hex dump of a block of memory
# usage: dump address length
define dump
p $arg0, $arg1
set $ch = $arg0
set $j = 0
set $n = $arg1
while ($j < $n)
Copyright © 2010, Juniper Networks, Inc.