Turning Off Log Filters; Monitoring Logging System Events - Juniper JUNOSE 11.1.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 3-24-2010 Reference Manual

host1(config)#log severity debug ppp pos 2/0
To obtain a list of the filters available in each event category, see "Event Categories"
on page 23 .

Turning Off Log Filters

You can turn off filters in three ways:
To turn off all filters:
To turn off all filters for an event category, use the no version of the log severity
command along with the category name. For example:
To turn off a specific filter, use the no version of the log severity command that you
used to add the filter. For example:
no log filters

Monitoring Logging System Events

Use the show log configuration command to display your log configuration. Use the
show log data command to display system events on your screen.
You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string you specify. See show Commands in JUNOSe
System Basics Configuration Guide for details.
<cr>
Turn off all filters
Turn off all filters for an event category
Turn off a specific filter
host1(config)#no log filters
host1(config)#no log severity bgpEvents filters
host1(config)#no log severity bgpEvents peer 10.0.0.2 10.0.0.1
Use to turn off log filters.
To turn off all filters for an event category, specify the category name.
Example
host1(config)#no log filters
To turn off a specific filter, use the no version of the log severity command that
you used to add the filter.
See no log filters.
Chapter 1: System Logging Overview
Turning Off Log Filters
17