Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 760

JUNOSe 11.1.x Broadband Access Configuration Guide
Table 160: show ipv6 interface Output Fields (continued)
720
Monitoring IPv4 and IPv6 Interfaces for Service Manager
Field Name
Group membership (queries,
responses, reductions)
ICMPv6 Statistics Sent
total
errors
destination unreach
admin unreach
param probs
time excd
pkt too big
redirects
echo requests
echo replies
rtr solicits
rtr advertisements
neighbor solicits
neighbor advertisements
Group membership (queries,
responses, reductions)
Operational MTU
Administrative MTU
Operational speed
Administrative speed
Creation type
Field Description
Number of queries, responses, and reduction requests
received from within a group to which the interface
is assigned
Total number of received packets
Error packets received
Packets received with destination unreachable
Packets received because the destination was
administratively unreachable (for example, the packet
encountered a firewall filter)
Packets sent with parameter errors
Packets sent with time-to-live exceeded
Number of packet-too-big messages received that
indicate a packet was too large to forward because
of the allowed MTU size
Received packet redirects
Echo request (ping) packets
Echo replies received
Number of received router solicitations
Number of received router advertisements
Number of received neighbor solicitations
Number of received neighbor advertisements
Number of queries, responses, and reduction requests
received from within a group to which the interface
is assigned
Value of the MTU
Value of the MTU if it has been administratively
overridden using the configuration
Speed of the interface
Value of the speed if it has been administratively
overridden using the configuration
Method by which the interface was created (static or
dynamic)