Using Dhcp Local Server Event Logs - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Using DHCP Local Server Event Logs

To troubleshoot and monitor your DHCP local server, use the following system event
logs:
NOTE: The dhcpLocalGeneral category replaces the dhcpLocalServerGeneral category.
See the JUNOSe System Event Logging Reference Guide for additional information about
the DHCP local server logs.
Related Topics
dhcpLocalClients DHCP local server client events and duplicate MAC address
detection
dhcpLocalGeneral DHCP local server infrastructure-related events and number
of client threshold events
dhcpLocalHighAvailability DHCP high availability events
dhcpLocalPool DHCP local address pool events, including normal, linked, and
shared pools
dhcpLocalProtocol DHCP local server protocol events
Clearing an IP DHCP Local Server Binding on page 482
Configuring DHCP Local Address Pools on page 484
Configuring AAA Authentication for DHCP Local Server Standalone Mode on
page 487
Configuring DHCP Local Server to Support Creation of Dynamic Subscriber
Interfaces on page 480
Differentiating Between Clients with the Same Client ID or Hardware Address
on page 480
Excluding IP Addresses from Address Pools on page 479
Limiting the Number of IP Addresses Supplied by DHCP Local Server on page 479
Logging Out DHCP Local Server Subscribers on page 481
Using DHCP Local Server Event Logs on page 483
Using SNMP Traps to Monitor DHCP Local Server Events on page 482
clear ip dhcp-local binding
dhcp delete-binding
ip dhcp-local auto-configure agent-circuit-identifier
ip dhcp-local excluded-address
ip dhcp-local limit
ip dhcp-local unique-client-ids
Chapter 19: Configuring DHCP Local Server
Using DHCP Local Server Event Logs
483