Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 309

For e series broadband services routers - broadband access
Table of Contents

Advertisement

Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Attribute
Number
Attribute Name
[26-44]
Tunnel-Interface-Id
[26-45]
Ipv6-Virtual-Router
[26-46]
Ipv6-Local-Interface
[26-47]
Ipv6-Primary-DNS
[26-48]
Ipv6-Secondary-DNS
[26-51]
Disconnect-Cause
[26-52]
Radius-Client-Address
[26-53]
Service-Description
[26-54]
L2tp-Recv-Window-Size
[26-55]
DHCP-Options
[26-56]
DHCP-MAC-Address
[26-57]
DHCP-GI-Address
[26-58]
LI-Action
[26-59]
Med-Dev-Handle
Description
Tunnel interface selector that AAA caches
as part of the tunnel-session profile and
the user's profile. This attribute is available
to the RADIUS authentication and
accounting servers.
Virtual router name for B-RAS user's IPv6
interface
Local IPv6 interface to apply to the E Series
side of the connection
B-RAS user's primary IPv6 DNS address
negotiated by DHCP
B-RAS user's secondary IPv6 DNS address
negotiated by DHCP
L2TP PPP disconnect cause information
received by the LAC
RADIUS relay server's IP address
AAA profile service description string
L2TP receive window size (RWS) for
a tunnel on the LAC
Number of packets that the peer can
transmit without receiving an
acknowledgment from the router
4-octet integer
Client's DHCP options
Client's MAC address
DHCP relay agent's IP address
Packet mirroring action
Link to which packet mirroring is applied
Chapter 6: RADIUS Attribute Descriptions
Subtype
Length
Length
Value
len
sublen
string: tunnel selector
len
sublen
string:
virtual-router-name
len
sublen
string:
ipv6-local-interface
len
sublen
hexadecimal string:
ipv6-primary-dns-
address
len
sublen
hexadecimal string:
ipv6-primary-dns-
address
len
sublen
string:l2tp-ppp-
disconnect-cause
12
6
integer:4-octet
len
sublen
string:profile-service-
description
12
6
integer:4-octet
len
sublen
string:dhcp-options
len
sublen
string:mac-address
12
6
integer:4-octet
len
sublen
Salt encrypted
integer: 0 = stop
monitoring; 1 = start
monitoring; 2 = no
action
len
sublen
Salt encrypted string;
contains an
ASCII-encoded
unsigned integer
Juniper Networks VSAs
269

Advertisement

Table of Contents
loading

Table of Contents