JUNOSe 11.1.x Broadband Access Configuration Guide
radius ignore egress-policy-name
[26-14] Service-Category
Use the following command to manage the Service-Category RADIUS attribute.
radius ignore atm-service-category
[26-15] PCR
Use the following command to manage the PCR RADIUS attribute.
222
CLI Commands Used to Modify RADIUS Attributes
Use to include the Egress-Policy-Name attribute in Acct-Start or Acct-Stop
messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include egress-policy-name acct-start enable
Use the no version to restore the default, enable.
Use to cause the Egress-Policy-Name attribute to be ignored in Access-Accept
messages.
You can control this behavior by enabling or disabling this command.
See radius ignore
Example
host1(config)#radius ignore egress-policy-name enable
Use the no version to restore the default, disable.
radius ignore atm-service-category
Use to cause the Service-Category attribute to be ignored in Access-Accept
messages.
You can control this behavior by enabling or disabling this command.
See radius ignore
Example
host1(config)#radius ignore atm-service-category enable
Use the no version to restore the default, disable.