Table 147: Service Manager Radius Accounting Attributes; Configuring Service Interim Accounting - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Table 147 on page 673 lists the RADIUS accounting attributes used by the Service
Manager application.

Table 147: Service Manager RADIUS Accounting Attributes

Configuring Service Interim Accounting

Interim accounting determines how often accounting information is updated and
sent to an accounting server. In addition to the user-based interim accounting
supported on the router, Service Manager supports service-related interim
accounting you can configure an interim accounting interval for services that are
created during a user RADIUS-based login and services that are activated by a CoA
operation.
The service interim accounting interval is specified by the RADIUS
Service-Interim-Acct-Interval attribute (VSA 26-140) that is included in the RADIUS
Access-Accept message or CoA-Request message that activates a service session.
Because the Service-Interim-Acct-Interval attribute is a tagged attribute, you can
configure different interim accounting intervals for a particular user's various services.
You can use the aaa service accounting interval command to specify the default
service interim accounting interval. Service Manager uses this interval value for
service accounting when the Service-Interim-Acct-Interval attribute is not configured.
NOTE: You can also configure interim accounting for users. A user interim accounting
interval is configured in the Acct-Interim-Interval RADIUS attribute (RADIUS attribute
85). You use the aaa user accounting interval command to specify the default user
interim accounting interval, which is used when RADIUS attribute 85 is not configured.
See "Configuring Remote Access" on page 3 for information about configuring user
interim accounting.
Attribute
Number Attribute Name
[26-83] Service-Session
[26-140] Service-Interim-Acct-
Interval
[44] Acct-Session-ID
Chapter 27: Configuring Service Manager
RADIUS Message
Type VSA Description
For service Name of the service (including
sessions only: parameter values) with which the
Acct-Start statistics are associated
Acct-Stop
Interim-Acct
Access-Accept and Number of seconds between
CoA-Request accounting updates for a service; a
tagged VSA
Acct-Start Accounting identifier that makes it
Acct-Stop easy to match start and stop records
Interim-Acct in a log file; the format is extended
to include a colon-separated value
that uniquely identifies the subscriber
session
Configuring RADIUS Accounting for Service Manager
673