Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 311

For e series broadband services routers - broadband access
Table of Contents

Advertisement

Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Attribute
Number
Attribute Name
[26-78]
IGMP-Version
[26-79]
IP-Mcast-Adm-Bw-Limit
[26-80]
IPv6-Mcast-Adm-Bw-
Limit
[26-81]
L2c-Information
[26-82]
Qos-Parameters
[26-83]
Service-Session
[26-84]
Mobile-IP-Algorithm
[26-85]
Mobile-IP-SPI
[26-86]
Mobile-IP-Key
[26-87]
Mobile-IP-Replay
[26-88]
Mobile-IP-Access-
Control-List
Description
IGMP Protocol Version (IGMP Version 1=1;
IGMP Version 2 = 2; IGMP Version 3 = 3)
The maximum multicast bandwidth that
will be admitted on an IP interface, in Kbps
The maximum multicast bandwidth that
will be admitted on an IPv6 interface, in
Kbps
Series of type length value (tlv) fields
(binary) representing the access loop
parameters as defined in GSMP extensions
for layer2 control (L2C) Topology Discovery
and Line
Configuration draft-wadhwa-gsmp-
l2control-configuration-00.txt (July 2006
expiration)
Name of the QoS parameter instance to
create on the user's interface, followed by
the value of the parameter. For example,
the max-bandwidth 4000000 parameter
instance represents the parameter name
that was defined using the qos-parameter-
define command (max-bandwidth) and the
value to assign to the parameter
(4000000). Multiple instances of this VSA
can be returned from RADIUS using this
format.
Name of the service (including parameter
values) that is associated with service
manager statistics
Authentication algorithm used for Mobile
IP registration
Security parameter index for Mobile IP
registration
Security association MD-5 key for Mobile
IP registration
Replay time stamp for Mobile IP
registration
Access control list to filter on basis of
care-of address
Chapter 6: RADIUS Attribute Descriptions
Subtype
Length
Length
Value
12
6
integer:1-octet
12
6
integer:4-octet
12
6
integer:4-octet
len
sublen
string: format is a
series of type length
value (tlv) fields
(binary) representing
the access loop
parameters
len
sublen
string: format is
parameter name
parameter value,
where parameter
name is ASCII name
of a parameter name
found in the QoS
parameter definition
and parameter value is
the ASCII
representation of
0–21474836470;
multiple instances of
this VSA can be
returned from
RADIUS using this
format
len
sublen
string:service-name
12
6
integer: 4-octet
12
6
integer: 4-octet
len
sublen
string: 32-octet
12
6
integer: 4-octet
len
sublen
string: 32-octet
Juniper Networks VSAs
271

Advertisement

Table of Contents
loading

Table of Contents