Table 22: Show Cops Info Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

CAT Rcv:
CC Sent:
CC Rcv:
SSC Sent:
Table 22 on page 137 lists the show cops info command output fields.
Meaning

Table 22: show cops info Output Fields

Field Name
Session Created
Sessions Deleted
Current Sessions
Bytes Received
Packets Received
Bytes Sent
Packets Sent
Keep Alive Received
Keep Alive Sent
Remote IP Address
Remote TCP Port
Client Type
Bytes Received
Packets Received
Bytes Sent
Packets Sent
REQ Sent
DEC Rcv
RPT Sent
DRQ Sent
SSQ Rcv
OPN Sent
Chapter 2: Monitoring and Troubleshooting Remote Access
1
0
0
0
Field Description
Number of COPS sessions created
Number of COPS sessions deleted
Number of current COPS sessions
Number of bytes received on all COPS sessions
Number of packets received on all COPS sessions
Number of bytes transmitted on all COPS sessions
Number of packets transmitted on all COPS sessions
Number of COPS keepalive messages received
Number of COPS keepalive messages sent
IP address of the remote pee
TCP port number of the remote peer
Type of client for the session. For this release the
client type must be 16640 (SRC client).
Number of bytes received for this COPS session
Number of packets received for this COPS session
Number of bytes sent on this COPS session
Number of packets sent on this COPS session
Number of Request packets sent on this COPS session
Number of Decision packets received on this COPS
session
Number of Report packets sent on this COPS session
Number of Delete Requests sent on this COPS session
Number of Synch Requests received on this COPS
session
Number of Open messages sent on this COPS session
Monitoring the COPS Layer Over SRC Connection
137