Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 114

JUNOSe 11.1.x Broadband Access Configuration Guide
NOTE: If the download interval is less than the retry interval, the server ignores the
retry interval setting.
aaa route-download now
74
Using RADIUS Route-Download Server to Distribute Routes
download interval The amount of time the route-download server waits
between route download operations. The newly created server downloads
routes as soon as the IP protocol is active on the virtual router that performs
the route download operation, and then repeats the download operation
every 720 minutes by default. You can set a download interval in the range
1–1440 minutes.
retry-interval The amount of time the server waits after a download failure
before attempting another route download. You can set the retry interval in
the range 1–60 minutes. The default interval is 10 minutes.
cost The cost of a downloaded route. You can specify a cost in the range
1–254. The default cost is 2.
tag The tag assigned to a downloaded route. You can specify a tag in the
range 1–4294967295. The default tag is 0.
base-user-name The virtual router that is used for route-download requests.
The default name is the router hostname.
password The password used in RADIUS Access-Request messages for
route-download requests. You can specify from 1 through 32 alphanumeric
characters. The default password is juniper.
synchronization The time that the server starts the route download
operation each day. You specify the time in 24-hour format, for example
03:45:00.
Example
host1(config)#aaa route-download 1200 retry-interval 25 password dl1456atl
synchronization 03:45:00
Use the no version to disable the route-download server.
See aaa route-download
Use to specify that the RADIUS route-download server immediately restart the
route download operation.
If a download is currently in progress when you issue this command without the
force keyword, the in-progress download continues until complete. No additional
download is started.
Use the force keyword to start an immediate download; a currently running
download is interrupted. The download is not retried if it fails.
Use the adjust-scheduler keyword to restart the configured download interval
from the time of this download. However, if the download fails, the download
interval is not changed and the download is not retried.