Table of Contents
Advertisement
JUNOSe 11.1.x Broadband Access Configuration Guide
Table 150: RADIUS-Enabled Statistics (continued)
When you enable statistics for a RADIUS-activated service, RADIUS accounting reports
can use the statistics.
Enabling Statistics Collection with the CLI
You use service session profiles to enable statistics when you activate a service session
with the CLI. See "Using Service Session Profiles" on page 680 for detailed information
about creating and using service session profiles.
For example, you can use the following procedure to capture statistics that are defined
in the service definition macro file for the tiered service:
1.
2.
The captured statistics are now used when you use the Service Manager show
service-management commands. For example:
host1# show service-management subscriber-session client1@isp1.com interface atm
User Name: client1@isp1.com, Interface: atm 4/0.1
Service : tiered(1000000,2000000)
688
Configuring Service Manager Statistics
RADIUS Attribute
service-statistics
Configure the service session profile to enable statistics. Specify the type of
statistics you want to capture (either time or both volume and time).
host1(config)#service-management service-session-profile isp1_tiered3
host1(config-service-session-profile)#statistics volume-time
host1(config-service-session-profile)#
Apply the service session when you activate the subscriber service session.
host1(config)#service-management subscriber-session client1@isp1.com
interface atm 4/0.1 service-session " tiered(1000000, 2000000)"
service-session-profile isp1_tiered3
4/0.1 service-session
Non-volatile : False
Owner : CLI
State : Config ApplySuccess
Activate : True
Statistics Type : time-based and volume-based
Statistics Complete : False
Poll Interval : 0
Poll Expire : 0
Activate Time : THU MAR 01 21:09:12 2006
Time : 0
Time Expire : 0
Volume MBytes: 2
Volume Expire MBytes: 1
Input Bytes : 594
Output Bytes : 1196
Tag
Value
6
2
Advertisement
Table of Contents
Troubleshooting
