Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 115

aaa route-download suspend
clear ip routes download
NOTE: Clear commands fail if the route-download server is in the process of
downloading routes from the RADIUS server.
Example
host1#aaa route-download now force adjust-scheduler
There is no no version.
See aaa route-download now
Use to temporarily suspend the RADIUS route-download server operation.
Example
host1#aaa route-download suspend
Use the no version to restore the route download operation.
See aaa route-download suspend
Use to synchronize downloaded access routes and the routes that are installed
in the routing tables of virtual routers.
Use the following options to synchronize downloaded routes for a specific virtual
router:
Specify a particular VRF whose downloaded routes you want synchronized.
If you do not specify an optional VRF, the current virtual router is used.
Specify the IP address and IP mask that identifies the subset of downloaded
routes that you want cleared in the routing table of the current virtual router
or in the specified VRF.
Use the wildcard character (*) to clear all downloaded routes in the routing
table of the current virtual router or in the specified VRF.
Use the following keywords to perform global clearing operations:
all Clears all downloaded routes from all virtual routers and VRFs.
reload Initiates a download of routes and then clear the routes from the
routing table of all virtual routers and VRFs.
Example 1 Clear all downloaded routes from the current virtual router
host1#clear ip routes download *
Example 2 Clear a subset of routes from a specific VRF
host1#clear ip routes download vrf NY12 192.168.50.102 255.255.0.0
Example 3 Clear all downloaded routes from all virtual routers and VRFs
Using RADIUS Route-Download Server to Distribute Routes
Chapter 1: Configuring Remote Access
75