Monitoring The Radius Attribute Used For Dhcpv6 Prefix Delegation; Monitoring Src Client Connection Status - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Related Topics

Monitoring the RADIUS Attribute Used for DHCPv6 Prefix Delegation

Display the RADIUS attribute used for DHCPv6 Prefix Delegation.
Purpose
To display the RADIUS attribute used for DHCPv6 Prefix Delegation:
Action
host1#show aaa dhcpv6-delegated-prefix
DHCPv6 Delegated Prefix : Framed-IPv6-Prefix
Related Topics

Monitoring SRC Client Connection Status

Display the current status of the SRC client connection to the SAEs. The command
Purpose
output refers to the SRC client by its former name, SSC client.
To display the status of the SRC client connection:
Action
host1#show sscc info
The SSC Client configured protocols : IP(v4), DHCP(v4), L2TP(LAC)
The SSC Client is currently unconnected
The SSC Client configured servers are:
show aaa ipv6-nd-ra-prefix
show aaa dhcpv6-delegated-prefix
Primary: 10.10.2.2:3
Secondary: 0.0.0.0:0
Tertiary: 0.0.0.0:0
Local Source: FastEthernet 0/0, Local Source Address: 10.13.5.61
The configured transport router is: default
The configured retry timer is (seconds): 90
The configured update-policy-request is: Enabled
The connection state is: NoConnection
SSC Client Statistics:
Policy Commands received
Policy Commands(List)
Policy Commands(Acct)
Bad Policy Cmds received
Error Policy Cmds received 0
Policy Reports sent
Connection Open requests
Connection Open completed
Connection Closed sent
Connection Closed remotely 0
Create Interfaces sent
Delete Interfaces sent
Active IP Interfaces
IP Interface Transitions
Synchronizes received
Synchronize Complete sent
Internal Errors
Communication Errors
Monitoring the RADIUS Attribute Used for DHCPv6 Prefix Delegation
Chapter 2: Monitoring and Troubleshooting Remote Access
0
0
0
0
0
0
0
0
0
0
2
0
0
0
0
0
153