Setting A Baseline For Dhcp External Server Statistics; Setting A Baseline For Dhcp Local Server Statistics; Monitoring Addresses Excluded From Dhcp Local Server Use - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

For e series broadband services routers - broadband access

Table of Contents

Setting a Baseline for DHCP External Server Statistics

To set a baseline for DHCP external server statistics.

There is no no version.

To set a baseline for DHCP local server statistics:

There is no no version.

To set a baseline for DHCP local server statistics for a specific ATM, Fast Ethernet,

or Gigabit Ethernet interface:

To set a baseline for DHCPv6 local server statistics:

Display addresses that have been excluded by the ip dhcp-local excluded-address

command. The DHCP local server does not allocate excluded addresses, because

they are already used by devices on the subnetwork.

To display excluded IP addresses:

host1(config)#show ip dhcp-local excluded

Issue the baseline ip dhcp-external command:

host1#baseline ip dhcp-external

Issue the baseline ip dhcp-local command:

host1#baseline ip dhcp-local

Issue the baseline ip dhcp-local command with the optional interface keyword

to specify the type of interface and interface specifier:

host1#baseline ip dhcp-local interface atm 3/1

Issue the baseline ipv6 dhcpv6-local command:

host1#baseline ipv6 dhcpv6-local

Dhcp Excluded Addresses

-----------------------

Chapter 22: Monitoring and Troubleshooting DHCP

Setting a Baseline for DHCP External Server Statistics