Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 737

NOTE: Currently, the HTTP local server does not support two different ports for IPv4
and IPv6 packets. However, the HTTP local server can listen for both IPv4 and IPv6
exception packets on the same port, simultaneously.
To configure the HTTP local server to support guided entrance for IPv4:
Access the virtual router context.
1.
host1(config)#virtual-router west400
host1:west400(config)#
Create the HTTP local server.
2.
host1:west40(config)#ip http
(Optional) Specify a standard IP access list that defines which subscribers can
3.
connect to the HTTP local server.
host1:west40(config)#ip http access-class chicagoList
(Optional) Specify the port on which the HTTP local server receives connection
4.
attempts.
host1:west40(config)#ip http port 8080
(Optional) Specify the maximum number of connections that can exist between
5.
one IP address and the HTTP local server.
host1:west40(config)#ip http same-host-limit 20
Specify the maximum time that HTTP local servers maintain connections.
6.
host1:west40(config)#ip http max-connection-time 1000
Enable the HTTP local server to listen for and process IPv4 exception packets
7.
host1:west40(config)#ip http server
Configure the HTTP redirect feature for the profile, interface, or subinterface that
8.
will be referenced in the guided entrance service definition.
host1:west40(config)#profile guidEnt6
host1:west40(config-profile)#ip http redirectUrl http://ispsite.redirect.com
To configure the HTTP local server to support guided entrance for IPv6:
Access the virtual router context.
1.
host1(config)#virtual-router west400
host1:west400(config)#
Create the HTTP local server.
2.
host1:west40(config)#ipv6 http
Chapter 27: Configuring Service Manager
Service Definition Examples
697