Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 715

Table 149: Sample Acct-Start Message for a Service Session (continued)
aaa service accounting interval
RADIUS Attribute
ingress-policy-name (vsa)
egress-policy-name (vsa)
calling-station-id
acct-input-gigawords
acct-input-octets
acct-output-gigawords
acct-output-octets
acct-input-gigapackets (vsa)
acct-input-packets
acct-output-gigapackets (vsa)
acct-output-packets
nas-port-type
nas-port
nas-port-id
acct-authentic
acct-session-time
acct-service-session
service-interim-acct-interva
l
Use to specify the default interval between service accounting updates. Service
manager uses the default interval when no value is specified in the
Service-Interim-Acct-Interval attribute (Juniper VSA 26-140).
This command and the aaa user accounting interval command replace the aaa
accounting interval command, which is deprecated and might be removed in
a future release.
The default interval is applied on a virtual router basis this setting is used for
services associated with all users who attach to the corresponding virtual router.
Specify the service accounting interval, in the range 10–1440 minutes. The
default setting is 0, which disables the feature.
Chapter 27: Configuring Service Manager
Sample Value
forwardAll
forwardAll
#ERX-01-00-06#E12#0
0
4032
0
2163
0
7
0
7
15
3221225472
FastEthernet 12/0
1
0
tiered(1280000, 5120000)
1200
Configuring RADIUS Accounting for Service Manager
675