[25] Class
Use the following command to manage the Class RADIUS attribute.
radius include class
[30] Called-Station-Id
Use the following command to manage the Called-Station-Id RADIUS attribute.
radius include called-station-id
[31] Calling-Station-Id
Use the following commands to manage information for the Calling-Station-Id RADIUS
attribute.
radius include class
Use to include the Class attribute in Acct-Start or Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include class acct-start disable
Use the no version to restore the default, enable.
radius include called-station-id
Use to include the Called-Station-Id attribute in Access-Request, Acct-Start, or
Acct-Stop messages.
You can control inclusion of the Called-Station-Id attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include called-station-id acct-start enable
Use the no version to restore the default, enable.
radius calling-station-format
radius calling-station-delimiter
radius include calling-station-id
radius override calling-station-id remote-circuit-id
Chapter 3: Configuring RADIUS Attributes
CLI Commands Used to Modify RADIUS Attributes
197